Back to Blog
Buying Guides 2026-11-21 Esco Optics, Inc. 0 views

Transmission Witness Samples: Choosing the Right Substrate

Transmission Witness Samples: Choosing the Right Substrate

Learn how to select the best transmission witness sample substrate for your coating verification needs, comparing glass and IR materials.

Why Substrate Choice Matters for Transmission Witness Samples

A transmission witness sample is a small polished substrate that runs alongside your production optics during coating. After the run, you test the witness sample to verify coating performance without touching the actual part. Choosing the right substrate material is critical because the witness sample must have similar optical properties and thermal behavior to the coated optics you are qualifying.

Esco Optics offers transmission witness samples in two broad categories: glass-based samples for the visible and near-IR range, and IR-grade samples made from single-crystal materials for longer wavelengths. Each group has specific refractive index options and material characteristics that affect how the sample behaves during coating and measurement.

Transmission Witness Sample Options at a Glance

  • Witness Sample, Transmission, 1.600-1.799: Witness Sample, Transmission, 1.600-1.799 — precision polished both sides to 60-40 scratch-dig, flatness < 1 wave @ 633nm at 80% CA, parallelism < 1 arc min, diameter 25.40 mm, thickness 1.50 mm. Melt lot controlled with individual data available on request. This glass-based sample covers common refractive index values (1.600-1.799) used in visible and near-IR optics. The melt lot tracking is valuable for coating houses that need traceability.
    Witness Sample, Transmission, 1.600-1.799
    Witness Sample, Transmission, 1.600-1.799
  • Witness Sample, Transmission, IR: Witness Sample, Transmission, IR — same 60-40 scratch-dig, flatness < 1 wave @ 633nm at 80% CA, parallelism < 1 arc min, diameter 25.40 mm, thickness 1.50 mm. Materials are single crystals: CaF2, Sapphire, ZnSe, Germanium, Silicon. Single-crystal IR materials extend the useful transmission range into the mid- and long-wave infrared, making these samples suitable for coating runs on IR optics like lenses and windows.
    Witness Sample, Transmission, IR
    Witness Sample, Transmission, IR

Glass Substrates for Visible and Near-IR Coatings

If your production optics use common glass types such as N-BK7, fused silica, or other visible-range materials, a glass witness sample in a similar refractive index range is the natural choice. The Witness Sample, Transmission, 1.600-1.799 covers index values from 1.607 (S-BSM2) up to 1.755 (S-TIH4), with additional variants like 1.610 S-NBM51, 1.618 S-PHM52, and 1.648 N-SF2. These materials are melt lot controlled, which means you can request individual melt data to correlate coating performance back to a specific glass batch.

All glass samples share the same 25.40 mm diameter and 1.50 mm thickness, with safety beveled edges. The 60-40 scratch-dig surface quality and < 1 wave flatness at 633 nm are consistent across variants, so the main selection driver is matching the refractive index to your coated part.

IR Substrates for Infrared Coatings

When your coating run involves infrared materials like germanium, silicon, or zinc selenide, a standard glass witness sample will not represent the coating behavior accurately. The Witness Sample, Transmission, IR uses single-crystal materials that match the thermal expansion and optical properties of common IR substrates. Available options include sapphire (n d 1.675), ZnSe (2.433), silicon (3.423), and germanium (4.024).

These IR samples also measure 25.40 mm in diameter and 1.50 mm thick, with the same surface quality and flatness specifications as the glass versions. The key trade-off is that the IR material options are fewer and the price is slightly higher (USD 24.48 vs USD 23.00 for the 1.600-1.799 glass sample), but the improved correlation with IR coating runs justifies the difference.

Glass vs IR Transmission Witness Sample: Key Differences

  • Refractive Index Range: Glass samples cover 1.600-1.799; IR samples cover 1.675 (sapphire) to 4.024 (germanium).
  • Material Type: Glass samples use melt lot controlled optical glasses; IR samples use single-crystal materials.
  • Typical Application: Glass samples suit visible and near-IR coating runs on standard optics; IR samples suit mid- and long-wave IR coating runs on IR-compatible substrates.
  • Price (Catalog): Glass 1.600-1.799: USD 23.00; IR: USD 24.48.

Practical Selection Advice

Start by identifying the refractive index of the optics you are coating. If your parts are made from common glass types like N-BK7, S-BSM2, or N-SF2, choose a glass witness sample with a matching or close refractive index from the 1.600-1.799 range. For IR parts made from germanium, silicon, or ZnSe, pick the corresponding IR witness sample variant.

If your coating run involves high-index glass types above 1.800, consider the Witness Sample, Transmission, 1.800-2.000 (product ID 1733121), which covers indices from 1.805 (S-TIH6) to 1.883 (S-LAH58) at a lower price point (USD 18.57). That sample shares the same 25.40 mm diameter, 1.50 mm thickness, and surface quality specs, making it a cost-effective option for high-index glass coatings.

Related Articles

Customer Service
Home
Products
Cart
Profile